1. Yi-Cheng Lin and Zih-Yi Su(蘇姿怡), Tin–Selenium Secondary Phase Etching of Cu2ZnSnSe4: A Selective Removal Route To Improve Solar Cell Efficiency, ACS Applied Energy Materials, 2018, 1(12), 6725–6729..pdf
2. Yi-Cheng Lina, Kuan-Ting (劉冠廷), Tung-Po Hsieh, Hung-Ru Hsu, Improving Ga distribution and efficiency of flexible Cu(In,Ga)(S,Se) solar cell using CuGa:Na target route, Materials Science in Semiconductor Processing, 94 (2019) 151–155. (impact factor 2.593).pdf
3.
Yi-Cheng Lin, Siang-Jin Wei(魏祥晉), Yuan-Jun Liang, Wei-Jhe Syu, A simple non-toxic
simultaneous selenization/sulfurization process for Cu(In,Ga)(S,Se)2 solar
cells, Materials
Chemistry and Physics, 219 (2018) 283-291 (impact factor
2.21).pdf
4.
Lin Yi-Cheng, Chen Heng-Jhih(陳恒誌), Cu(In,Sn)Se2 thin films for absorption of energy from
infrared radiation, Chinese Journal of Physics 56 (2018) 2022–2030.(impact
factor 1.051).pdf
5.
Yi-Cheng Lin, Li-Ching Wang(王麗晴), Kuan-Ting Liu, Ya-Ru Syu, Hung-Ru Hsu, A
comparative investigation of secondary phases and MoSe2 in Cu2ZnSnSe4 solar
cells: effect of Zn/Sn ratio, Journal of Alloys and Compounds,
743 (2018) 249–257. (impact factor 3.779) pdf
6.
Li-Ching Wang(王麗晴), Yi-Cheng Lin, Hung-Ru Hsub,
Improving the efficiency of a Cu2ZnSn(S,Se)4 solar
cell using a non-toxic simultaneous selenization/sulfurization process, Materials
Science in Semiconductor Processing, 75 (2018) 84–94. (impact
factor 2.593) pdf
7.
Yi-Cheng Lin, Xiao-Cun Wei(魏孝存), Hybrid silver
nanowires/nanogold particles film for a Cu(In,Ga)Se2 thin film solar cell,
Chinese Journal of Physics 55 (2017) 1219–1224.(impact factor 1.051)Download.pdf
8.
Yi-Cheng Lin, Chien-Mu Lai(賴建木), Hung-Ru Hsu, Impact of sodium on the secondary
phases and current pathway in Cu2(Zn,Sn)Se4 thin
film solar cell, Materials Chemistry and Physics, 192 (2017)
131-137 (impact factor 2.21) Download.pdf
9.
Yi-Cheng Lin, Jyun-Ting Huang(黄俊庭), Li-Ching Wang, and Hung-Ru Hsu, Effect of
Cu/(In+Ga) ratios on the secondary phases and the performance of Cu2InGa(S,Se)4 thin
film solar cells, Journal of Alloys and Compounds, 690
(2017) 152-159 (impact factor 3.779) Download.pdf
10.
Yi-Cheng Lin,Ding-Hao Hong(洪鼎皓), Yin-Ting Hsieh, Li-Ching Wang,and Hung-Ru Hsu,
Role of Mo:Na Layer on the Formation of MoSe2 Phase in
Cu(In,Ga)Se2 Thin Film Solar Cells, Solar Energy
Materials & Solar Cells, 155 (2016) 226-233. (impact
factor 5.018) 下載
11.
Yi-Cheng Lin, Yin-Ting Hsieh(謝尹庭), Chien-Mu Lai, and Hung-Ru Hsu, Impact of Mo
barrier layer on the formation of MoSe2 in Cu(In,Ga)Se2 solar
cells, Journal of Alloys and Compounds, 661(2016),
168-175 (impact factor 3.779, cited No. = 18) 下載.pdf
12.
Li-Ching Wang(王麗晴), Yi-Cheng Lin, Effect of the stacked
structure on performance in CZTSSe thin film solar cells, Applied
Surface Science, 354 (2015) 14–19 . (impact
factor 4.439) 下載.pdf
13.
Yi-Cheng Lin, Yen-Tai Chao(趙晏泰), Pin-Chuan Yao, Influence of humidity on the
growth characteristics and properties of chemical bath-deposited ZnS thin
films, Applied Surface Science ,307 (2014)
724–730 (impact factor 4.439) 下載.pdf
14.
Yi-Cheng Lin, Ming -Tsung Shen(沈明宗), Yung-Lin Chen, Hung-Ru Hsu, and Cheng-Han Wu, A
study on MoSe2layer of Mo contact in Cu(In,Ga)Se2 thin
film solar cells, Thin Solid Films, 507(2014)166-171(impact factor 1.939) 下載.pdf
15.
Yi-Cheng Lin, Xiang-Yu Peng (彭祥育), Li-Ching Wang, Yao-Leng Lin, Cheng-Han Wu,
Shih-Chang Liang, Residual stress in CIGS thin film solar cells on polyimide:
simulation and experiments, J Mater Sci: Mater Electron, 25(2014)
461-465 ( impact factor 2.324) 下載.pdf
16.
Yi-Cheng Lin, Yi-Ting Chen(陳苡婷), and Pin-Chuan Yao, Effect of post-heat-treated
NiOx overlayer on performance of nanocrystalline TiO2 thin
films for dye-sensitized solar cells, Journal of Power Sources, 240
(2013) 705-712 (impact factor 6.945, cited No. = 5) 下載.pdf
17.
Yi-Cheng Lin, Xu Jing Yao(徐敬堯), Li-Ching Wang, Jyh-Ming Ting, Improving
simultaneous crystallization and Ga homogenization in Cu(In,Ga)Se2 film
using an evaporated In film, Journal of Alloys and Compounds, 572
(2013) 31–36 (impact factor 3.779, cited No. = 6) 下載.pdf
18.
Chia-Huang Shen(沈家煌), Yi-Cheng Lin*, Preparation and characterization of
Cu(In,Ga)Se2 thin film solar cell by printing technique with
powders of quaternary alloy and NaF, Journal of Materials Science: Materials in
Electronics, 24 (2013), 2906-2912. ( impact factor 2.324) 下載.pdf
19.
Y. C. Lin, Y. Y. Tu (涂昀暘), C. H. Shen, Na-doped Mo target sputtering for Cu(In,Ga)Se2 thin
film solar cells, Journal of Materials Science: Materials in Electronics, 24
(2013),514–519 ( impact factor 2.324) 下載.pdf
20.
C. H. Shen(沈家煌), Y. C. Lin*, W. L. Liu, Chemical resistance properties of
molybdenum back electrodes used in non-vaccum Cu(In,Ga)Se2 thin
film solar cell, Vacuum, 86 (2012) 2136-2139, (impact factor 2.067) 下載.pdf
21.
Y. C. Lin, T. Y. Chen(陳姿尹), L. C. Wang, S. Y. Lien, Comparison of AZO, GZO,
and AGZO thin films TCOs applied for a-Si solar cells, Journal of
The Electrochemical Society, 159(6) (2012) H599-H604 (impact
factor 3.662, cited No. = 30) 下載.pdf
22.
Y. C. Lin, Z. Q. Lin (林智群), C. H. Shen, L Q. Wang, C. T. Ha, Chris Peng,
Cu(In,Ga)Se2 films prepared by sputtering with a chalcopyrite
Cu(In,Ga)Se2 quaternary alloy and In targets, Journal of
Materials Science: Materials in Electronics, 23(2012) 493-500, ( impact
factor 2.324, cited No. = 22) 下載.pdf
23.
Y. C. Lin, W. T. Yen (嚴文材), C. H. Shen, and P. C. Yao, Surface Texturing of
Ga-Doped ZnO Thin Films by Pulsed Direct-Current Magnetron Sputtering for
Photovoltaic Applications, Journal of Electronic Materials, 41 (2012) p.442-450
(impact factor 1.566, cited No. = 2) 下載.pdf
24.
Y. C. Lin, W. T. Yen (嚴文材), Y. L. Chen, L. Q. Wang and F. W. Jih, Influence
of annealing temperature on properties of Cu(In,Ga)(Se,S)2 thin
films prepared by co-sputtering from quaternary alloy and In2S3 targets,
Physica B, 406 (2011) 824-830.(impact factor 1.453, cited No. = 23) 下載.pdf
25.
Y. C. Lin, B. L. Wang (王柏霖), W. T. Yena and C. H. Shen, Surface textured
molybdenum doped zinc oxide thin films prepared for thin film solar cells using
pulsed direct current magnetron sputtering, Thin Solid Films 519 (2011)
5571-5576. (impact factor 1.939, cited No. = 25) 下載.pdf
26.
Y. C. Lin, J. H. Ke (柯佳宏), W. T. Yen, S. C. Liang, C. H. Wu ,and C. T.
Chiang, Preparation and characterization of Cu(In,Ga)(Se,S)2 films
without selenization by co-sputtering from Cu(In,Ga)Se2 quaternary and In2S3targets, Applied
Surface Science, 257 (2011), 4278-4284. (impact factor 4.439,
cited No. = 56) 下載.pdf
27.
W. T. Yen (嚴文材), Y. C. Lin*, and J. H. Ke, Surface textured ZnO:Al thin
films by pulsed DC magnetron sputtering for thin film solar cells
applications, Applied Surface Science, 15 (2010),
960–968 (impact factor 4.439, cited No. = 65) 下載.pdf
28.
Y. C. Lin, C. H. Chang (張健輝), C. H. Shen, P. W. Wang and Y. C. Lee, The
characteristics of chemical and heat stability properties of chromium-
vanadium- aluminum co-doped zinc oxide films for dye-sensitized solar cells,
Thin Solid Films, 518 (2010), 6055-6060 (impact factor 1.939, cited No. = 6) 下載.pdf
29.
Y. C. Lin, B. L.
Wang (王柏霖), W. T. Yen, C.T. Ha and Chris Peng, Effect of
process conditions on the optoelectronic characteristics of ZnO:Mo thin films
prepared by pulsed direct current magnetron sputtering, Thin Solid Films, 518
(2010), 4928–4934, (impact factor 1.939, cited No. = 60) 下載.pdf
30.
Wen-Tsai Yen (嚴文材), Yi-Cheng Lin*, Pin-Chuan Yao, Jia-Hong Ke,Yung-Lin Chen,
Effect of post-annealing on the optoelectronic properties of ZnO:Ga films
prepared by pulsed direct current magnetron sputtering, Thin Solid Films, 518
(2010), 3882-3885 (impact factor 1.939, cited No. = 73) 下載.pdf
31.
Y. C. Lin, M. Z. Chen (陳銘佐), C. C. Kuo, and W. T. Yen, Electrical and Optical
Properties of ZnO:Al Film prepared on Polyethersulfone Substrate by RF
Magnetron Sputtering, Colloids and Surfaces A: Physicochemical and
Engineering Aspects, 337,(2009) 52-56. (impact
factor 2.829, cited No. =
46) 下載.pdf
32. P.C. Yao, S.T. Hang, Y.S. Lin, W.T. Yen(嚴文材), Y.C. Lin, Optical and electrical characteristics of Al-doped ZnO thin films prepared by aqueous phase deposition, Applied Surface Science, 257 (2011), 1441-1447. (impact factor 4.439, cited No. = 55)
2. A simple non-toxic simultaneous selenization_sulfurization process for CIGS solar cells.pdf (3.2 MB)
3. A study on MoSe2 layer of Mo contact in Cu(In,Ga)Se2 thin film solar cells.pdf (1.1 MB)
4. Chemical resistance properties of molybdenum back electrodes used in.pdf (624 KB)
5. Cu(In,Ga)Se2 films prepared by sputtering with a chalcopyrite Cu(In,Ga)Se2 quaternary alloy and In targets.pdf (740 KB)
6. Cu(In,Sn)Se2 thin films for absorption of energy from infrared radiation.pdf (3.4 MB)
7. Effect of Cu(In+Ga) ratios on the secondary phases and the.pdf (3.7 MB)
8. Effect of post-annealing on the optoelectronic properties of ZnO_Ga film.pdf (817 KB)
9. Effect of process conditions on the optoelectronic characteristics of ZnO_Mo thin films.pdf (1.6 MB)
10. Effect of the stacked structure on performance in CZTSSe thin film.pdf (1.9 MB)
11. Electrical and optical properties of ZnO_Al film prepared on polyethersulfone substrate by RF magnetron sputtering.pdf (834 KB)
12. Hybrid silver nanowires nanogold particles film for a Cu(In,Ga)Se 2 thin film solar cell.pdf (1.3 MB)
13. Impact of Mo barrier layer on the formation of MoSe2 in Cu(In,Ga)Se2 solar cells.pdf (3.2 MB)
14. Impact of sodium on the secondary phases and current pathway in CZTS.pdf (3.4 MB)
15. Improving Ga distribution and efficiency of flexible CIGS solar cell using CuGa_Na target route.pdf (2.3 MB)
16. Improving simultaneous of crystallization and Ga homogenization.pdf (2.4 MB)
17. Improving the efficiency of a Cu2ZnSn(S,Se)4 solar cell using a non-toxic simultaneous selenization sulfurization process.pdf (2.2 MB)
18. Influence of humidity on the growth characteristics and properties ofchemical bath-deposited ZnS thin films.pdf (2.8 MB)
19. Influence ofannealingtemperatureonpropertiesofCu(In,Ga)(Se,S)2 thin films.pdf (1.6 MB)
20. Journal of The Electrochemical Society.pdf (1.2 MB)
21. Journal_of_Power_Sources_240_(2013)_705-712.pdf (1.7 MB)
22. Mechanical properties of ZnOMo thin film by pulsed magnetron sputtering.pdf (898 KB)
23. Na-doped Mo target sputtering for Cu(In,Ga)Se2 thin film solar cells.pdf (1012 KB)
24. Preparation and characterization of Cu(In,Ga)(Se,S)2films without.pdf (1.4 MB)
25. Preparation and characterization of Cu(In,Ga)Se2 thin film solar cell by printing technique with powders of quaternary alloy and NaF.pdf (1.1 MB)
26. Residual stress in CIGS thin film solar cells on polyimide.pdf (362 KB)
27. Surface textured molybdenum doped zinc oxide thin films.pdf (1.5 MB)
28. Surface Texturing of Ga-Doped ZnO Thin Films.pdf (1.1 MB)
29. The characteristics of chemical and heat stability properties of chromium-vanadium-aluminum co-doped zinc oxide films.pdf (1.3 MB)
30. Tin−Selenium Secondary Phase Etching of Cu2ZnSnSe4.pdf (3.4 MB)