求助 | 註冊 | 登入
指導教授
by lyllaiber, 2013-04-23 00:00:12, 人氣(1525)
 
 
 
 

 

頼元隆 教授 國立彰化師範大學工業教育與技術學系
E-mail:  lyllaiber@cc.ncue.edu.tw

Tel: 886-4-7232105 Ext. 7258

Fax: 886-4-7211287

研究室: 機械大樓 409 
專長:
經歷:
  1. 大葉大學機械與自動化工程學系專任助理教授、副教授(2005/8-2013/2) (Dayeh University, Mechanical and Automation Engineering)
  2. 恩德科技研發副理 (1995-2005)


期刊論文
A.期刊論文(Refereed Papers)

13

Y.L. Lai*, 2010. “Tool-path Generation of Planar NURBS Curves”, Robotics and Computer Integrated Manufacturing, 26(5), 471-482. (SCI, Impact Factor = 1.687/2010, ENGINEERING, MANUFACTURING 6/37)

14

J.P. Hung, Y.L. Lai, 2010. Finite element prediction on the machining stability of milling machine with experimental verification. Proceedings of World Academy of Science, Engineering and Technology, 72, 207-213. (EI)

15

Y.L. Lai*, 2011/2. “An Intersection Tracing Method for Interference-free Planar Tool-path Generation”, International Journal of Product Research, 49(3), 671-687. (SCI, Impact Factor = 1..033/2010, ENGINEERING, MANUFACTURING 13/37)

16

Y.L. Lai, J.P. Hung*, 2011/2. “Computational Modeling of Surface Fracture of Polyethylene Acetabular Cup in Total Artificial Hip Replacement”, Advanced Materials Research, 197-198, 1718-1722. (EI)

17

J.P. Hung, Y.L. Lai*, 2011/2. “Tool-path Generation for Conical Groove of Cylindrical Cams by Small-sized Cutting Tools”, Advanced Materials Research, 189-193, 3046-3049. (EI)

18

J.P Hung, Y.L. Lai, Y.C. Ching, T.L. Lo, 2011/9. “Modeling the Machining Stability of a Vertical Milling Machine under the Influence of the Preloaded Linear Guide”, International Journal of Machine Tools and Manufacture, 51(9), 731-739. (SCI, Impact Factor = 1.956/2010, ENGINEERING, MANUFACTURING 2/37).

19

Y.L. Lai*, D.R. Chen, P.J. Hsu, 2011/9. “Using Simulated Annealing to 2D Nesting Problems on Hollow Sheets”, Journal of Science and Engineering Technology, 7(3), 13-21.

20

Y.L. Lai*, P.J. Hsu, T.L. Luo, H.C. Chang, 2012/3. “ The Study of Implant Placement Guides in Immediate Implant Surgery - Coordinate Transformation”, Journal of Science and Engineering Technology, 8(1), 1-13.

21

J.P. Hung, Y.L. Lai*, 2012/1. “Boolean-based Operation on Overlapping CL Paths for 3D Models”, International Journal of Product Research, 50(2), 379-392. (SCI, Impact Factor = 1.033/2010, ENGINEERING, MANUFACTURING 13/37)

22

J.P. Hung, Y.L. Lai*, 2012/10. “Wide Roller Guide Machining by Four-axis Machine Tools for Cylindrical Cams”, International Journal of Advanced Manufacturing Technology, 62(9-12), 923-932. (SCI, Impact Factor = 1.128/2010, ENGINEERING, MANUFACTURING 12/37)

23

Y.L. Lai, J.P. Hung*, 2012/12. “Influence of Linear Guide Arrangement on the Vibration Characteristics of a Positioning Stage”, Journal of the Chinese Society of Mechanical Engineers, 33(2), 113-122. (SCI)

24


J.P. Hung, Y.L. Lai*, 2013/10. “Analysis of the machining stability of a milling machine considering the effect of machine frame structure and spindle bearings : experimental and finite element approaches”, International Journal of Advanced Manufacturing Technology, 68(9-12), 2393-2405. (SCI, Impact Factor = 1.205/2012, ENGINEERING, MANUFACTURING 18/39, AUTOMATION & CONTROL SYSTEMS 31/59, ENGLAND)

Y.L. Lai, J.P. Hung*, Y.R. Chen, 2013/9. “Dynamic Characteristics of a Gantry Milling Machine under the Influence of Linear Guide Preload”, Applied Mechanics and Materials, 404, 194-199. (EI)

J.S.S. Wu, P.J. Hsu, J.P. Hung, Y.R. Chen Y.L. Lai*, 2013/9. “3D Quasi-Dynamic Load Contact Analysis of Conjugate Spur Gear”, Applied Mechanics and Materials, 404, 213-219. (EI)

J.S.S. Wu, W.H. Chen, Y.L. Lai*, 2013/12. “3D Contact Analysis of Conjugate Spur Gear by a Complete Mating Process”, Journal of Mechanical Science and Technology, 27(12), 3787-3795. (SCI, Impact Factor = 0.616/2012, ENGINEERING, MANUFACTURING 79/125, SOUTH KOREA)

J.S.S. Wu, W.H. Chen, Y.L. Lai*, 2015. “3D Contact Analysis of Coupled Surfaces by a Novel Contact Transformation Method”, Journal of Mechanical Science and Technology, in review. (SCI)

J.S.S. Wu, Y.L. Lai*, 2015. “Modeling and Analysis of Time-variant Thermal Errors in a Micro-milling Machine Tool”, in preparation.

J.S.S. Wu, Y.L. Lai*, 2015. “Tri-axial Feed Drive Thermal Error Analysis for a CNC Micro-milling”, in preparation.

Y.L. Lai*, 2015. “Integrated Stability Lobe and Topology Optimization for Machine Tools”, in preparation.

Y.L. Lai*, 2015. “Optimization of the Singular Configuration for a Novel Five axis Machine Tool”, in preparation.

Y.L. Lai*, 2015. “Modeling and Application of Postprocessor System for a Novel Hybrid Parallel-Serial Five-Axis Machine Tool”, in preparation.

Y.L. Lai*, 2015. “Modeling of Virtual Machining for a Novel Hybrid Parallel-Serial Five-Axis CNC Machine Tool”, in preparation.

Y.L. Lai*, 2015. “The Modeling and Application for a Novel Hybrid Parallel-Serial Five-Axis Machine Tool with Modular Optimization”, in preparation.

Y.L. Lai*, 2015. “Development and Application of Postprocessor System for a Novel Hybrid Parallel-Serial Five-Axis Machine Tool with NC Path Optimization”, in preparation.

Y.L. Lai*, 2015. “Inverse Kinematics and Smoothness at Singular Configuration for a Hybrid 5-axis Machine Tool”, in preparation.

Y.L. Lai*, 2015. “Optimization of the Singular Configuration for a Novel Five-axis Machine Tool”, in preparation.

B.研討會論文(Conference Papers)

26

賴元隆、洪瑞斌、邱冠霖、邱國峰, 2010/12, “四軸機床加工寬滾子槽圓柱凸輪”, Proc. of the 27th National Conference on Mechanical Engineering (CSME), Taipei, ROC.

27

賴元隆、洪瑞斌、陳薡任、許博榕, 2010/12, “NC機台在線上的原料裁切問題”, Proc. of the 27th National Conference on Mechanical Engineering (CSME), Taipei, ROC.

28

賴元隆、許博榕、邱冠霖、林鈺翔, 2010/12, “以拘束為基底之巨集模組生成”, Proc. of the 27th National Conference on Mechanical Engineering (CSME), Taipei, ROC.

29

賴元隆、蔡易儒、林冠鋐、邱國峰, 2010/12, “利用正規化過程處理NURBS 曲線降階”, Proc. of the 27th National Conference on Mechanical Engineering (CSME), Taipei, ROC.

30

J.P. Hung, Y.L. Lai, 2010/12. Finite element prediction on the machining stability of milling machine with experimental verification. Proceedings of World Academy of Science, Engineering and Technology, Singapore.

31

JP Hung, Yuan-Lung Lai*, 2011/4. “Tool-path Generation for Conical Groove of Cylindrical Cams by Small-sized Cutting Tools”, International Conference on Manufacturing Science and Engineering(ICMSE 2011), Guilin, China.

32

Yuan-Lung Lai, FT Chiang, JP Hung, 2011/4. “Computational Modeling of Surface Fracture of Polyethylene Acetabular Cup in Total Artificial Hip Replacement”, International Conference on Manufacturing Science and Engineering(ICMSE 2011), Guilin, China.

33

賴元隆、范綱桓、林冠鋐, 2011/12, “斷層掃描於植牙系統之研究”, Proc. of the 28th National Conference on Mechanical Engineering (CSME), Taichung, ROC.

34

林辰育、巫崇瑋、邱國峰、賴元隆, 2011/12, “五軸工具機之電腦模擬機構建立”, Proc. of the 28th National Conference on Mechanical Engineering (CSME), Taichung, ROC.

35

J.P. Hung, H.C. Chang, Y.L. Lai*, 2012/9, “Implementation of on-line Cutting Stock Problem on NC Machines”, Proceedings of World Academy of Science, Engineering and Technology, Singapore, Singapore.

36

Y.L. Lai, Y.R. Chen, J.P. Hung*, T.L. Luo, HH. Hsiao, 2012/9, “Effect of the Machine Frame Structures on the Frequency Responses of Spindle Tool”, Proceedings of World Academy of Science, Engineering and Technology, Singapore, Singapore.

37

J.S.S. Wu, P.J. Hsu, H.C. Chang, Y.L. Lai*, 2012/11, “Real-time Optimization in Cutting Stock Problems on NC Machines”, Conference on Society of Manufacturing Engineers - SME 2012, Taiping, Taichung.

38

許博榕、巫崇瑋、林辰育、賴元隆*, 2012/11, “植牙鑽孔定位系統之研究”, Conference on Society of Manufacturing Engineers - SME 2012, Taiping, Taichung.

J.S.S. Wu, P.J. Hsu,  J.P. Hung, Y.L. Lai*, 2013/7, “3D Quasi-Dynamic Load Contact Analysis of Conjugate Spur Gear”, 2013 2nd International Symposium on Manufacturing Systems Engineering, Singapore, Singapore.

J.P. Hung, Y.L. Lai, Y.R. Chen, 2013/7, “Dynamic Characteristics of a Gantry Milling Machine under the Influence of Linear Guide Preload”, 2013 2nd International Symposium on Manufacturing Systems Engineering, Singapore, Singapore.

賴元隆*、林辰育、吳健任、卓孟彥, 2013/12, “並聯式精密定位平台於五軸工具機設計之研究”, Proc. of the 30th National Conference on Mechanical Engineering (CSME), I-Lan, ROC.

賴元隆*、巫崇瑋、鄭育叡、詹小瑩, 2013/12, “可重組式工具機之研究-設計與製造”, Proc. of the 30th National Conference on Mechanical Engineering (CSME), I-Lan, ROC.

Y.L. Lai, H.Y. Chan, T.L. Luo, 2014/6, “A Study of a Postprocessor System for a Hybrid Parallel-Serial Five-Axis Machine Tool”, The 16th International Conference on Machine Design and Production, Izmir, Turkey.

詹小瑩、廖建智、吳健任、賴元隆*, 2014/11, “可重組式串並聯五軸工具機之開發”, 第十七屆全國機構與機器設計學術研討會, 台中, 台灣.

賴元隆*、鄭育叡、詹小瑩,  2014/12, “新型混合串並聯式五軸後處理器模型建立與應用”, Proc. of the 31th National Conference on Mechanical Engineering (CSME), Taichung, ROC.

柯凱鴻、鄭育叡、賴元隆*, 2015/5, “並串聯式機構於五軸工具機之應用”, 20屆中小企業與學術界合作研發產品研討會, 彰化, 台灣.

賴元隆*、吳健任、廖俊南、黃匯智、林晉全, 2015/5, “可重組式工具機之組裝與檢測”, 2015綠色科技工程與應用研討會(GTEA), 台中, 台灣.

賴元隆*、廖建智、趙子桂、蔡秉桓、柯凱鴻, 2015/5, “整合切削穩態圖與拓樸優化技術之工具機設計流程”, 2015綠色科技工程與應用研討會(GTEA), 台中, 台灣.

賴元隆*、卓孟彥、詹小瑩、廖建智、林志霖, 2015/5, “新型五軸工具機之奇異性架構優化”, 2015綠色科技工程與應用研討會(GTEA), 台中, 台灣.

Yuan-Lung Lai1*, Chien-Chih Liao1, Hsiao-Ying Chan, Ching-Kuei Su, 2015/4, “Inverse Kinematics of a Postprocessor for Five-Axis Machine Tools”, 2015 International Conference on Intelligent Systems Research and Mechatronics Engineering (ISRME 2015), Henan, China.

James Shih-Shyn Wu, Yi-Tsung Lin, Yuan-Lung Lai*, 2015/4, “Contact Transformation for the Prediction of Structural Wears”, 2015 International Conference on Intelligent Systems Research and Mechatronics Engineering (ISRME 2015), Henan, China.



附件

發表討論